Dissolvo® Water Soluble Tape is designed to allow the user to place the dam in the proper position before maximizing the adhesion of the seal. The strength of the “tack” or “stickiness” of the adhesive allows the user to have control and re-°©‐position the dam if not properly placed on the first attempt. Once the dam is in place, the user can increase adhesion by reactivating the adhesive on the tape portion of the dam with a damp sponge. A tight seal will be formed as it dries.

Dissolvo^® Water Soluble Paper and Tape are 100% biodegradable and eco-friendly. Both are non-toxic products that do not cause reactions or adverse effects when used.

Dissolvo^® Water Soluble Paper and Tape have a flash point equivalent to ordinary paper, which is 450°F (232°C).

Dissolvo^® Water Soluble Paper and Tape will dissolve in either hot or cold water. However, the rate of dissolvability increases as the temperature of the water increases.

Dissolvo^® Water Soluble Paper and Tape cannot dissolve in solvents such as MEK or acetone. The products must be flushed water, steam or an aqueous solution.

Dissolvo^® Water Soluble Paper and Tape will not dissolve in oil or fuel, however both can be flushed water, steam or an aqueous solution.

Dissolvo Water Soluble Paper and Tape dissolves in most aqueous solutions or steam.